Home / Products / Cold Saw Series / PNF350-2AV

Non-Ferrous Pivot Arm Cold Saw - PNF350-2AV

Hyd-Mech Manual Non-Ferrous Pivot Arm Cold SawHyd-Mech Pivot Arm Cold Saw

The PNF350-2AV is a manual non-ferrous pivot arm cold saw that is used to cut non-ferrous metals.

The PNF350-2AV miters from 45° left to 45° right. It also features a robust sawing head that can tilt 45° for compound miter cutting.

Featuring a 4 3/4" round hollow capacity at 90°, 2.5/ 3 HP motor, and a 14" blade, the PNF350-2AV is the ideal choice for quick, clean, accurate cutting of non-ferrous metals.

 

 

 

Only in 2012 - US Manufacturing Companies Save with Tax Incentives!

 

Featured Specifications

Hyd-Mech Manual Non-Ferrous Pivot Arm Cold Saw PNF350-2AV
Capacity at 90°: Rectangular Hollow 7" x 2.75"
Square Hollow 4"
Round Hollow 4.75"
Blade Size: Max: 14"
HP: 2.5 / 3 HP
Operation: Manual
Mitering?: 45° left and right

Click to Download Brochure Click to download PDF brochure

 

Standard and Optional Features

Hyd-Mech Manual Non-Ferrous Pivot Arm Cold Saw PNF350-2AV
Standard Features Available Options

  • Manual saw head movement by means of control handle with safety spring loaded trigger switch to start or stop blade
  • Robust sawing head allowing for compound miter cutting
  • Safety head locking device – ensuring two hand operation
  • Rotating table mounted on large roller bearings with stops at 90 and 45 angles
  • Two pneumatic operating vises, which can easily slide along the longitudinal axis of the material
  • Vises are equipped with moveable aluminum jaws which can be adjusted vertically
  • Two speed motor allowing for choice of two blade speeds - 1700 & 3400 rpm
  • Mist coolant system with impulse switch ensuring coolant only runs when cutting
  • One blade

  • Pneumatic vertical operating vise
  • 24" material stop
  • T2500 chip collector
  • 350 mm cold saw blades
  • K40 roller table

 

 

Need a Price Quote or More Information? Fill Out Our Online Contact Form or Call Hyd-Mech Today at 1-877-276-7297